Ad #1539
Publish on 01-23-2020


Ian Hatfield
0411 724 044
  • Condition:
  • Country:
  • State:
  • Survey:
  • Material:
  • Length:
    5.9 mtr
  • Beam:
    2.3 mtr
$ 33,700
Plus GST


5.9 metre Work punt, with twin outboard installation. Price for complete hull as per description below -  AUD $33,700 Plus GST if applicable
7.4 metre Work punt, with twin outboard installation. Price for complete hull as per description below -  AUD $41,800 Plus GST if applicable
These are Production Boats with stock normally always ready in the factory, on the water or in Australian holding yard Brisbane
The 5.9 mtr Work Boat is a heavy-duty Marine Grade Plate Aluminium boat with double floor and 100 x 50 RHS internal floor structure. All floors are pressure tested in the factory to 0.20 bar. Bottom and Side Plate is 5mm with the Main Deck and Forward Deck, slot welded 4mm plate and come wicomplete with heavy duty, bollards, toe holds, grab rails, boarding ladder, covers for the bilge pumps, fuel tank, lifting lugs and console.
Paint is Marine Grade PU with the inside being white and the outside colour is your choice

These boats are plan approved to AMSA Survey D - "CE Approval" Module B Category D. They can be used as work boats under Self Declaration Form 579 with AMSA, no survey inspection required meaing less headaches with inspections and costly Surveyors fees

Construction Material: 4/5mm Marine Grade 5083 H116 Aluminium
Length over all. Choose either 5.90 metres or 7.4 metres (pricing is above)
Beam over all. 2.30 metres
Forward section fitted with bump fendering
Gunwale Tie Down Rail: Full length
Deck Toe Hold: Full Length
Floor structure is double plate fully welded with 100x50 RHS longitudinals & cross bracing
120lt aluminium fuel tank fitted into transom behind seat
Lifting lugs fitted x 4
Forward bow storage with hatches
Navigation Lights: Forward
Deck is aluminium plate 4mm coated with non-slip rubber membrane
Approval 1: Survey AMSA - Domestic Commercial Vessel
Approval 2: CE Module B Category D
Maximum Outboard size: 200hp (not included, please call for price)
Colour -TBA Client's choice, single colour
Batteries: Twin with high amperage isolator switch
Bilge Pumps: 2 x 2000 GPH
Warranty: Structural 5 years - Fittings 12 Months 

Additional Fittings
Side Fenders - Top Full Length: $740.00
Side Fenders - Bottom Full Length: $740.00
Side Seating - Both Sides: $1,950.00
Enclosed Sides: $2,670.00 (Extra Load Carrying Capacity)
Side Console: $980.00
Cable Steering + Wheel: $780.00
Heavy Duty Hydraulic Steering + Wheel: $1,880.00
Stainless Steel Tie Bar: $550.00 (for twin motor installation)
High pressure deck wash and hose: $380.00
Gunwale Grab Rail - Both sides: $1,270.00
Motor Guard with D Fender - $2,450.00
Ant-foul Hull and Sides 300mm - $880.00

Canopy Sizes Available

Canopy 1.50 x 2.30: $850.00
Canopy 3.00 x 2.30: $1,270.00
Canopy 4.00 x 2.30: $1,560.00
Canopy 5.00 x 2.30: $1,750.00
Canopy 6.00 x 2.30: $1,980.00

Ask about Pricing,  We stock Yamaha, Suzuki and Mercury

Trailer built to suit
Rating: 2,000kg
Frame: Hot dipped galvanised
Coupling: 50mm Ball AS4177.3 with handbrake
Axles: 2 x 45mm Square HDG
Suspension: Roller Rocker Dacromet with load rating of 2500kg
Brakes: Disc on front axle with Dacromet finish
Wheels: Hot dipped galvanised
Tyres: 14" 165R75
Price: $11,500 no rego