fbpx

Ad #1532
Publish on 08-29-2019

Contact

Ian Hatfield
0411 724 044
Email: admin@commercialboats.com.au
  • Condition:
    NEW
  • Country:
    Australia
  • State:
    Qld
  • Material:
    Aluminium Plate 5083 H116
  • Length:
    7.40
  • Beam:
    2.30
$ 39,700
Plus GST

Description

Work Boat Punt 7.4mtr CE Approved - with engine pod/s

Overview
The most popular work boat in our range, available is now available in 3 sizes, 5.9mtr, 7.4mtr and now the extra wide WB7400-3 (3.00 meters wide). These are the best built work punts on the market, as well as the best priced in Australia today. They are not plank boats, these are a true heavy-duty Marine Grade Plate Aluminium boat with double floor and 100 x 50 RHS internal floor structure. All floors are pressure tested in the factory to 0.20 bar. Bottom and Side Plate is 5mm with the Main Deck and Forward Deck, slot welded 4mm plate, In fact, everything about these boats are truly Heavy Duty, Bollards, Toe Holds, Grab Rails, Boarding Ladder, Covers for the Bilge Pumps, Fuel Tank, Lifting Lugs, Console and we are always looking to improve

The rear area behind the seat is now recessed 50mm to allow for any water, fuel spills to concentrate within the bunded area for removal by the built in bilge pumps or if fuel spills or by hand. 
The paint is Marine Grade PU inside is White and the outside colour is your choice
These are Production Boats with stock normally always ready in the factory, on the water or in Australian holding yard Brisbane 

Certification
These boats are plan approved to AMSA Survey D if you want to put them into Survey, but why? We are the first company to have available in Australia "CE Approval" Module B Category D. They can be used as work boats under Self Declaration Form with AMSA, no survey inspection required, less headaches with inspections and costly Surveyors fees

Specifications WB7400
Construction Material: 4/5mm Marine Grade 5083 H116 Aluminium
Length OA: 7.40 meters
Width OA: 2.30 meters
Height OA: 0.75 meters
Forward section fitted with bump fender 
Gunwale Tie Down Rail: Full length
Deck Toe Hold: Full Length
Floor structure is double plate fully welded with 100x50 RHS longitudinals & cross bracing
120lt aluminium fuel tank fitted into transom behind seat 
Lifting lugs fitted x 4
Forward bow storage with hatches
Navigation Lights: Forward 
Deck is aluminium plate 4mm coated with non-slip rubber membrane
Approval 1: Survey AMSA - Domestic Commercial Vessel 
Approval 2: CE Module B Category D 
Motor: Maximum 200hp (not included)
Colour -TBA Client's choice, single colour
Batteries: Twin with high amperage isolator switch
Bilge Pumps: 2 x 2000 GPH 
Warranty: Structural 5 years - Fittings 12 Months

Additional Fittings
Side Fenders - Top Full Length: $740.00
Side Fenders - Top Bottom Full Length: $740.00
Side Seating - Both sides: $1,950.00
Enclosed Sides: $2,670.00
Side Console: $980.00
Cable Steering + Whhel: $780.00
Heavy Duty Hydraulic Steering + Wheel: $1,880.00
High pressure deck wash and hose: $380.00
Gunwale Grab Rail - Both sides: $1,270.00 
Motor Guard - $2,450.00
Canopy 1.50 x 2.30: $850.00
Canopy 3.00 x 2.30: $1,270.00
Canopy 4.00 x 2.30: $1,560.00
Canopy 5.00 x 2.30: $1,750.00
Canopy 6.00 x 2.30: $1,980.00
Ant-foul Hull and Sides 300mm - $880.00

Engines - Ask about Pricing
We stock Yamaha, Suzuki and Mercury
 
Trailers TWB5900 or TWB7400
Rating: 1,999kg
Frame: Hot dipped galvanised
Coupling: 50mm Ball AS4177.3 with handbrake
Axles: 2 x 45mm Square HDG
Suspension: Roller Rocker Dacromet with load rating of 2500kg 
Brakes: Disc on front axle with Dacromet finish
Wheels: Hot dipped galvanised
Tyres: 14" 165R75
Trailer Price: $11,500 no rego


Information