Ad #1606
Published on 05-04-2021
See all ads from alumarine


Ian Hatfield
0411 724 044

  • Condition:
  • Country:
  • State:
  • Survey:
    2D NS
  • Material:
  • Length:
    6.5 Mtr
  • Beam:
    2.5 Mtr
$ 55,000
Plus GST


Work Boat - Push Boat - Work Punt
New build 6.3 mtr (measured length) 6.5 mtr overall. 
This is our latest design and feature a number of modification and updates. 
Firstly, we have increased the thickness of the bottom plate to 5mm and have put a small vee in the bottom of the hull. This has been a huge success in reducing the slamming you get from flat bottomed punts. The ride in this vessel is just so much better. We have also included two steps, one either side of the outboard which make access much easier. Outboard is also now protected by a bumper bar. Also, you will notice the front pushbar which is mounted on top of the full length stringers is now standard. Fully sealed self draining deck with AMSA compliant foam under (Foam is also under the gunwales)
The gunwales are 4mm folded plate and the top of the gunwale is 150mm wide and this not only provides a new level of stiffness to the vessel but allows for siderails, also now a standard feature. Gunwales also feature custom HDPE fendering system fitted to port and starboard gunwale and bow. This system slides on contact and does not grab and tear like rubber. Lifting points are also now standard. (these are non certified, please let me know if you require certification as there is a cost involved for this)
We also have GA for twin outboards with centre console which can be sent on request.

LOA: 6.5 metre
Measure Length: 6.3 metre
Beam: 2.5 metre
Draft: .25 mm
Complete hull: $55,000
Outboard: Suzuki 60hp 4 stroke - electric start with battery and fuel tank $12,000 (this price is subject to change, please ask)

For lead in and build times, please call Ian Hatfield on 0411 724 044